AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |
Back to Blog
Magazine release lever kidd5/3/2023 ![]() You can now separate the action, trigger group, and barrel from the stock. Place the safety halfway between safe and fire. Depending on the age of your gun you will need either a flat head screwdriver or an allanwrench. This screw is located on the bottom of the stock and in front of the mag well. Unscrew the action screw from the action while leaving it threaded into the stock. Remove the barrel band by loosening the screw with a flat head screwdriver and slide it off the front of the barrel. Your Extended Magazine Release is now installed and you can reassemble your gun. ![]() Place your Timber Creek Outdoors 10/22 EMR or EMR XL into the trigger group housing and reinstall the pivot pin. Make sure the slot in the bolt catch plate is aligned with the pivot pin hole and press the magazine latch plunger into the housing. This three piece set includes the magazine release, the speed/long lever, and the extended/medium lever. Once the pin is removed you can slide the mag release out of the trigger housing. Stjernelund Custom Rifles KIDD Magazine Release Levers KD-MRL - Upgrade to the KIDD Interchangeable Magazine Release System for the 10/22 geometry trigger. If it does not you may need to use a small punch. Locate the magazine release pivot pin (IMAGE A) and push it out of the trigger group housing. ![]() Always make sure your firearm is unloaded and the chamber is empty.Ĭlose the action and remove the stock (The make and model of your stock may change this step if you are unsure of how to remove your stock see Removing a standard Ruger stock below.) ![]()
0 Comments
Read More
Leave a Reply. |